FREE Lifetime Tech Support
We're here to help you Do The Job Right.
This product includes FREE Lifetime Tech Support from our U.S.-Based Customer Solutions Team.
Looking for advice on your project or product recommendations? Our in-house Project Advisors have the same passion for DIY automotive restoration as you do. Get advice on your project, personalized product recommendations and answers to your questions. Give us a call or email projectadvisors@eastwood.com.
METAL GLAZE Ultra is the world's best sanding polyester putty for use as a finishing coat over body filler, large panels, or small spot filling. Its unparalleled sanding qualities are a result of the patent pending EcoResin. Its unique thinner viscosity makes it ideally suited for intermixing with other Metalworks products to improve flowout. Formulated with ZNX 7 for improved adhesion. For use on Sanded Body filler, Steel, Galvanized Steel, E Coat, Aluminum, Rigid to Semi rigid Thermoset Plastics, SMC, Fiberglass (cosmetic repairs only), Cured sanded 2K primer surfacers, Sanded OEM paints.
What's Included
30 fluid ounces in pump container and blue cream hardener
safety_info_ax
Always wear eye skin and respiratory protection when using this product. use in a well ventilated area. VOC content 1.67 LBS/Gallon
accessories_ax
13520ZP Contour Premium Body Filler, 13523 ZP Contour Sprayable Polyester Filler, 50240ZP Eastwood Urethane Primer, 51136 Eastwood Color Chart, 12846Z Aerosol Injected Cleaner, 13919 Body Filler Spreaders, 14292 Spraing Steel Body Filler Spreaders, 31273 Quick Mix Board
Clean and degrease with Eastwood PRE. Use 80 to 180 grit to remove or scuff the paint and featheredge. Place the desired amount of material on a clean, non fibrous surface. Measure hardener 2% by weight Mix thoroughly until uniform color is achieved. Spread a thin layer of mixed material over surface using firm pressure. Apply additional layers if desired. Do not apply over new or uncured coatings. Avoid thick heavy applications. Finish with 180 grit, final sand with 180 grit followed by 220 to 320 grit if desired.
How thick of a layer can you put on will it fill small dents
Asked by: Kmello
You can use any of our fillers.
METAL GLAZE is not used for as anything other than a finishing coat not to build up.
Ultra is the world's best sanding polyester putty for use as a finishing coat over body filler, large panels, or small spot filling. Its unparalleled sanding qualities are a result of the patent pending EcoResin. Its unique thinner viscosity makes it ideally suited for intermixing with other Metalworks products to improve flowout. Formulated with ZNX 7 for improved adhesion. For use on Sanded Body filler, Steel, Galvanized Steel, E Coat, Aluminum, Rigid to Semi rigid Thermoset Plastics, SMC, Fiberglass (cosmetic repairs only), Cured sanded 2K primer surfacers, Sanded OEM paints.
Answered by: Anonymous
Date published: 2023-09-08
What’s the set time for this product?
Asked by: 93Shelby
Generally with proper hardner mix ratio's you'll lget a 2-3 min working time and about 10-15 till cured to sand.
Answered by: Scott C
Date published: 2020-04-29
Can this be applied DTM?
Asked by: RonWolf
You can certainly apply this filler DTM.
Answered by: Scott C
Date published: 2021-05-11
Why not 1K primer, I know they say 2K is better, but I don't know what makes it better.
Asked by: trigger
2K stands for 2 components. It is a product that requires a catalyst/ activator. These coating will always give you greater durability and adhesion in comparison to 1K coatings.
Answered by: Kelly H
Date published: 2021-05-11
can you use evercoat metal glae ultra after primer
Asked by: gus1
This filler can be placed over Cured sanded 2K primer surfacers and Sanded OEM paints.
Chat 
