Bendpak Two Post Parking Lift PL6000DC-ADD-ON

BendPak Add-On Shared Column and Platform 2-Post Parking Lifts

The BendPak PL-6000DC is an add-on shared column and platform two-post parking lift specifically designed to accommodate the needs of real estate developers, architects, engineers, automotive dealers, and commercial parking operators. They can be ganged together with shared columns allowing you to fit more units into a smaller space. The PL-6000DC dual-column parking lift can accommodate a wide array of vehicles including SUVs, sedans, and sports cars and offers the perfect combination for both long-term and short-term parking. Typically, long-term parking is the upper level and short-term parking below. They can be installed inside a typical 8-foot parking space to accommodate most cars and light trucks and operate in both indoor and outdoor locations.

Product specs and advantages:

• Low operating cost—platform driven by gravity when lowered, no electric motor consumption is required
• Designed for installation on typical parking surfaces—detailed installation manual is provided along with floorplan and foundation drawings and video attached with products will help customers have easier installation work
• Ganged column design allows multiple installations in minimum space
• Commercial grade design and construction—add-on column for PL-6000DC lifts; lifting capacity: 6,000 lbs. (2,722 kg)
• Galvanized and corrugated anti-slip platform
• Freestanding design when ganged two or wide
• Overhead power unit provides smooth quiet hydraulic operation
• Platform can be stopped at different heights to fit various vehicles and ceiling heights
• Full-width channel-locked center panels protect lower vehicle
• Wide deck platform accommodates pickups, vans, and cars
• Dual direct-drive hydraulic cylinders
• Automatic safety lock combined with anti-fall device to hold platform securely
• Virtually maintenance-free composite carriage bearings
• Electric key switch for security and safety
• Automatic shut-off when operator releases key switch
• Manual lock release available in case electricity failure (optional)
• Hydraulic overloading protection
• Photocell sensor prohibits lift to be lowered if vehicle is parked below

Safety features:

• Mechanical safety locks are spaced every 4 inches
• 24 V operator controls and lock release
• Photocell sensor prohibits lift to be lowered if vehicle is parked below
• Electric protection for power overload or improper voltage
• Automatic locking system during power outage
• Emergency stop button
• Upper limit switch
• Pressure relief valve and pressure compensated flow control valve to ensure safe operation and level lifting
• Industrial-grade hydraulic cylinders feature a single-piece, pilot fitted, machined steel piston, wrapped with specially designed, pressure loaded U-cup piston seals, backups, and wear bands to virtually eliminate fluid bypass
  
  Important Note: BendPak lifts are supplied with concrete fasteners that meet the criteria of the American National Standard ANSI/ALI ALCTV-(Current). The buyer is responsible for all charges relating to any special regional structural or seismic anchoring requirements specified by any other agencies or codes such as the Uniform Building Code (UBC) or International Building Code (IBC).