BluePrint Engines 350 Cubic Inch 341 HP Fully Dressed Crate Engine BP350CTCK
In stock
SKU
63245
350CI Cruiser Crate Engine | Longblock | Aluminum Heads | Roller Cam | Carbureted | Front Drive
Loading...
- HP and Torque: 341 HP / 371 FT LBS
- Compression Ratio: 9.0:1
- Aluminum Heads
- Hydraulic Roller Cam
- Cast Iron Crankshaft
- Hypereutectic Pistons
Block:
- NEW BluePrint Cast Iron Block
- Manufactured and Machined in the USA!
- 4-Bolt Main
- 4.000" Bore
- 1-Piece Rear Main Seal
- Mech fuel pump provision: Yes
- Passenger Side Dipstick
- Drilled and tapped for clutch linkage
Rotating Assembly:
- Cast Iron Crankshaft
- 3.480" Stroke
- Forged 5.700" connecting rods
- Hypereutectic pistons
- Internal Front/ External Rear engine balance
Cylinder Heads:
- BluePrint Aluminum Cylinder Heads - H8002K
- 64cc chamber
- 2.02" intake/1.60" exhaust valves
- 195cc intake/75cc exhaust runners
Cam Specs:
- Cam Type: Roller
- .477 Intake .471 Exhaust
- 202 Intake / 212 Exhaust duration
- @ .050 - 115 degrees lobe separation
Ignition Timing
- 32 degreess Total at 3500 RPM
Notes:
- This engine is an excellent cruiser and daily driver engine. This engine makes up to 18 inches of vacuum, and is designed to work excellent with power brakes, stock torque converter, stock gearing, and run on 87 octane fuel
| Product Name | BluePrint Engines 350 Cubic Inch 341 HP Fully Dressed Crate Engine BP350CTCK |
|---|---|
| Is ESP | No |
| Is Canceled | No |
| Warranty Term | Manufacturer |
| 90 Day Returns | No |
| ATF Recommended products - Enabled | No |
| specifications_ax | RECOMMENDATIONS Your BluePrint engine was dyno tested with the parts and specifications listed below. If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet.
|
| warranty_ax |