BluePrint Engines GM 496 ci. 600 HP Stroker Dressed Fuel Injected Long Block Crate Engine BP4967CTFK
DESCRIPTION
- HP & Torque: 600 HP / 568 FT LBS
Compression Ratio: 10.1 to 1
Aluminum Heads
Hydraulic Roller Cam
Forged Crank
Hypereutectic Pistons
BLOCK:
- NEW BluePrint Cast Iron Block, 454 BBC
Manufactured and Machined in the USA!
4-Bolt Main
4.250" Bore
1-Piece Rear Main Seal
Mech fuel pump provision: Yes
Standard Deck
ROTATING ASSEMBLY:
- New BluePrint Forged Crankshaft
4.250" Stroke, Bored .060" over
6.385" connecting rods w/ 150,000 psi bolts
Hypereutectic pistons
External
CYLINDER HEADS:
- BluePrint Aluminum Cylinder Heads - PS8013
119cc chamber
2.30" intake/1.88" exhaust valves
316cc intake/124cc exhaust runners - Cylinder heads feature a .300 in. raised exhaust port vs an OEM casting.
- Must verify header/exhaust clearance
CAM SPECS:
- Cam Type: Roller
.647 Intake .647 Exhaust
248 Intake / 254 Exhaust duration
@ .050 - 112 degree lobe separation
IGNITION TIMING:
- 10-16° initial and total timing 32-34° at 3500 RPM
ALSO INCLUDES:
- Intake Manifold single plane, satin aluminum
- Sniper EFI System
- Valve covers, oil pan and timing cover
- Installed black complete front accessory drive system with A/C, P/S, WP, all belts and pulleys.
- Dyno test results shipped with engine
WARRANTY:
- 30 month / 50,000 mile
NOTES:
-
- NEW BluePrint 454ci block manufactured and machined in the USA!
Not for EGR - Cylinder heads feature a .300 in. raised exhaust port vs an OEM casting.
- Must verify header/exhaust clearance
- NEW BluePrint 454ci block manufactured and machined in the USA!
| Product Name | BluePrint Engines GM 496 ci. 600 HP Stroker Dressed Fuel Injected Long Block Crate Engine BP4967CTFK |
|---|---|
| Is ESP | No |
| Is Canceled | No |
| Warranty Term | Manufacturer |
| 90 Day Returns | No |
| ATF Recommended products - Enabled | No |
| specifications_ax | Your BluePrint engine was dyno tested with the parts and specifications listed below. If you prefer to install a different part, your engine may not produce the horsepower recorded on your dyno sheet.
Part Number: BP4967CTFKB Fuel Delivery Type: Sniper EFI Spark Plug: BPP7938 NGK 7938 BKR5E Spark Plug Gap: .035" Harmonic Balancer: Weighted, 8" diameter Flexplate/Flywheel: Weighted Stall Converter: 2000-2400 rpm Intake Manifold: Single plane, satin aluminum Fuel Recommendation: 91 Octane Timing (Initial/Total Advance): Initial timing - 10-16° and Total timing 32-34° Firing Order: 1,8,4,3,6,5,7,2 Recommended Break in Oil : BPP710 Recommended Service Oil : BPP10W30 Recommended Oil Filter ; BPP51061 Total Oil capacity with production oil pan, and Correct BPP51061 Filter : 8 Quarts Notes: New BluePrint block manufactured and machined in the USA, |
| warranty_ax | The satisfaction of our customers is our highest priority at BluePrint Engines. We use quality components to balance your engine's rotating assembly within two grams of spec. We dyno test your crate engine and certify that it's ready to deliver horsep |
