Eastwood HotCoat® PCS-250 Dual Voltage Powder Coating Gun Starter Kit
Eastwood PCS-250 Dual Voltage Powder Coating Gun
The Eastwood PCS-250 Dual-Voltage HotCoat™ Powder Coating Gun gives you complete coverage from tight areas to large surfaces while operating on standard 120v household current. This innovative system will allow you to achieve the benefits of powder coating small parts instead of coating them with paint. This new and improved dual-voltage system gives you the capability to coat small areas using the low 15kv setting or coat large areas using the high-voltage setting 25kv. All you need is a compressed air source (5-10 PSI from a portable tank with a regulator or a compressor) to power your gun, an electric oven or toaster oven to cure the finish and a well-ventilated workspace in which to do your coating. This new and improved gun features color-coded cabling, larger ground clamp, increased trigger room and a clear bottle so you can see the powder color and fluidizing action.
- Extremely durable finish
- Coat and cure in under an hour!
- Easy to apply
- Quick color changes
- Economical
- Operates on standard 120v / 60Hz household current
- Versatility with two settings for improved coverage
- Low 15,000-volt setting
- High 25,000-volt setting for multi-coat coverage over larger areas
- Increased powder adhesion
- Minimal overspray
- Color-Coded cables for easy setup
- More trigger-room for additional comfort
- Larger ground clamp
- Clear bottle allows you to see powder color, level and fluidizing action
- Larger internal passages for improved powder flow
- Refined power supply for more consistent coverage and powder-build
Eastwood Powder Coating Accessories Kit
This accessories kit comes with the items you need to start powder coating.
The high temperature tape and silicone plugs make it easy to mask areas you do not want to get powder on. The safety wire is great for hanging parts on your powder coating rack or oven. This kit also comes with an in-line air filter to keep contaminates out of your gun and powder. Also included is an 8 oz. bottle of high gloss black powder and extra storage bottles.
| Product Name | Eastwood HotCoat® PCS-250 Dual Voltage Powder Coating Gun Starter Kit |
|---|---|
| Is ESP | No |
| Is Canceled | No |
| Warranty Term | 1 year |
| 90 Day Returns | Yes |
| ATF Recommended products - Enabled | No |
| specifications_ax |
|
| FAQ's | Eastwood Powder Coating Videos - CLICK HERE (Q) How long does the baking process take? (A) For improved flow out (less "orange peel"), bake coated parts at 500 degreesF until powder flows out (about 3-4 minutes for light sheet metal parts), then turn down the heat to 400 degreesF for a full 15 minutes. (Q) What are the electrical requirements? (A) This HotCoat Gun requires 110-125VAC, 2 amps at 50-60 Hz. Can be used with a voltage transformer such as 220-240VAC to 110-125VAC as long as the transformer can handle 2 amps. |