Eastwood Rust Encapsulator Black - Quart
In stock
SKU
16065ZP
Eastwood Rust Encapsulator Black - Quart is rated
out of
5 by
773.
Stop rust in its tracks!
Loading...
Stop rust in its tracks! Rust Encapsulator is the easiest way to stop and prevent rust and corrosion from spreading.
- Superior durability (tested to 500 hours in a salt-spray chamber)
- UV Resistance - a topcoat is not needed
- Penetrates deeper to prevent rust from spreading or forming, even in hard-to-reach areas
- Requires minimal prep and cures fast
- Heat resistant to 400F
- 2%-10% Gloss Level
Simply wire brush any loose rust, wipe with PRE painting prep to clean the surface and apply. Eastwood Rust Encapsulator has proven to be superior in UV resistance, preventing rust creep, and overall durability.
| Product Name | Eastwood Rust Encapsulator Black - Quart |
|---|---|
| Warranty Term | 90 day |
| Is ESP | No |
| Is Canceled | No |
| 90 Day Returns | Yes |
| ATF Recommended products - Enabled | No |
| FAQ's | Rust Encapsulator can be applied with the Undercoating System, but this application isn't recommended because Rust Encapsulator requires surface to be free of grease, oil, and loose rust. The best product to coat inside box sections is the Heavy Duty Anti-Rust (16017 ZP). This waxy, oily product flows into pinch welds & through rust to seal surface from contact with moisture & air, but cannot be painted over so is only suitable for inside box sections that don't show. Use lacquer thinner for cleanup. |
| warranty_ax | 90 Day |
| Storage Case Included | No |
| Do Not Use - Application - Depreciated | Wire Brush to remove loose rust, scale and paint. Remove dust, grease, oil deposites. Thoroughly stir can contents to assure complete mixing. Feather surrounding paint with 220 grit sandpaper. Brush apply directly from the can or thin 20% w/lacquer thinner to spray. Single coats dry to the touch in 20 minutes and are thoroughly dry in 3-4 hours at 68 degrees F. For greater durability a second coat can be applied one hour after the first. Allow 6-8 hours after last coat before applying top coat. See can label for more details. |
| Accessories | SAS Bandit Respirator Eastwood Internal Frame Coating w/Spray Nozzle Eastwood Rust Converter 10041Z PRE Painting Pre |
| Do Not Use - Instructions - Depreciated | 1 |
| Do Not Use - Safety Info - Depreciated | Work in a well ventilated area when applying this product. The use of a respirator like our Professional Respirator (34029) is recommended when applying this coating. |