Eastwood 200 Amp AC/DC TIG Welder
With its versatile design, powerful capabilities, and impressive list of standard features, the Eastwood TIG 200 AC/DC may be the only TIG welder you ever need.
Add an Eastwood Service Plan for additional protection?
Learn More
When you're serious about your TIG welds on steel, stainless steel, or aluminum, count on the Eastwood TIG 200 AC/DC to get you through your toughest projects. It's packed with quality features for maximum functionality and uses the latest technologies for performance you can count on.
It starts with dual power cords that plug into either a 120V or 240V outlet, letting you use this 200-Amp welder almost anywhere. Its high-frequency start delivers precise arc control to prevent tungsten contamination and it features square-wave inverter to accurate weld aluminum in addition to both mild and stainless steel up to 1/4-in. thick.
A flex-head WP-17 torch is included for maximum versatility along with a ceramic gas lens kit, a comfortable rocker-style foot pedal, and a flowmeter. An easy-to-read control panel gives you full command of the settings you need without confusing features you won’t use.
Can also stick weld with addition of electrode holder (Eastwood Item # 20517). With a 60% duty cycle, the TIG 200 AC/DC is a workhorse that keeps you welding until the job is finished.
And it’s all backed up by Eastwood’s 3-year warranty and lifetime tech support.
Eastwood TIG 200 AC/DC features:
- Welds mild steel, stainless steel, and aluminum up to ¼-in thick
- Versatile dual-power TIG welder runs on either 120V or 240V
- Square-wave inverter for accurate aluminum welding
- High-frequency start ensures instant arc strike with no tungsten contamination
- Remote foot pedal infinitely controls amperage for precision
- Included flex-head WP-17 torch accepts commonly available consumables
- Flow meter gauge for precise gas flow control and quick, repeatable adjustment
- Can also stick weld in AC or DC +/- mode (requires additional electrode holder)
- 60% duty cycle at 190 amps (100% at 143 amps)
- Backed by Eastwood's no-hassle return policy and 3-year warranty
| Product Name | Eastwood 200 Amp AC/DC TIG Welder | ||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 90 Day Returns | Yes | ||||||||||||||||||||||||||||||||||||
| ATF Recommended products - Enabled | Yes | ||||||||||||||||||||||||||||||||||||
| Is Canceled | No | ||||||||||||||||||||||||||||||||||||
| specifications_ax |
Duty Cycle The Rated Duty Cycle refers to the amount of welding that can be done within an amount of time. The Eastwood TIG 200 has a duty cycle of 60% at 190 Amps. It is easiest to look at your welding time in blocks of 10 Minutes and the Duty Cycle being a percentage of that 10 Minutes. If welding at 190 Amps with a 60% Duty Cycle, within a 10 Minute block of time you can weld for 6 Minutes with 4 Minutes of cooling for the welder. To increase the Duty Cycle you can turn down the Amperage Output control. Going above 190 Amps will yield a lower duty cycle. |
||||||||||||||||||||||||||||||||||||
| Input Voltage | 120v, 240v | ||||||||||||||||||||||||||||||||||||
| Weldable Materials | Aluminum, Stainless Steel, Steel | ||||||||||||||||||||||||||||||||||||
| Max Capability | 1/4 in. (6.35mm) | ||||||||||||||||||||||||||||||||||||
| Collet Size (in.) | 1/8 in. (3.18mm) | ||||||||||||||||||||||||||||||||||||
| Torch Cable Length | 12 ft. | ||||||||||||||||||||||||||||||||||||
| Ground Cable Length | 9.5 ft. | ||||||||||||||||||||||||||||||||||||
| warranty_ax | 3 Years | ||||||||||||||||||||||||||||||||||||
| Warranty Term | 3 year | ||||||||||||||||||||||||||||||||||||
| Warranty Eastwood | 6 Years | ||||||||||||||||||||||||||||||||||||
| Is ESP | Yes |
