Eastwood UNDERHOOD BLACK® Paint
In stock
SKU
10024Z-10045ZP-12032Z Underhood Black Paint
Eastwood UNDERHOOD BLACK® Paint is rated
out of
5 by
11.
The perfect enamel for a correct OEM-matching finish under the hood in low gloss or matte finish
Eastwood UNDERHOOD BLACK® is the perfect high performance cross-linked enamel paint for the correct OEM-matching finish under the hood...choose low gloss or matte.
- Restores OEM Low Gloss Finish
- Protects From Rust and Corrosion
- Fast Drying Formula
- Perfect for Firewalls and Inner Fenders
UNDERHOOD BLACK® Low Gloss is just the right 15-19 percent low gloss finish for most radiator supports, inner fender walls, underhood brackets, and other under hood parts. The Matte formula duplicates the near-zero gloss finish you find in many older cars for those parts. Both formulas resist chipping, scratches and light impacts.11-oz. aerosol can covers 6 square feet; 1-quart can covers 48 square feet.
Customer Review: "I'm building a 1969 Yenko Camaro. I have the subframe and arms powder coated. I used Underhood Black on the engine bay and the underfloor. You cannot tell the difference between the powder coating and the Eastwood paint...amazing results! Looks factory-new now."UNDERHOOD BLACK® is the correct shade of black under hood spray paint for engine-compartment paint on radiator supports, inner fender walls, lug wrenches, jack bases, under hood brackets and other parts. Black under hood paints from typical hardware stores are either too thick, too glossy, or the wrong color.
Just clean, degrease, and prepare the parts well (use our Self-Etching Primers), then apply this engine-compartment paint for a professional, factory-like, under hood paint finish. Enamel withstands up to 250° F and goes on thin for a smooth finish that doesn't hide surface details. Do not use with enamel primers. 10045ZP - Eastwood Underhood Black Quart paint is Spray Only. Do Not attempt to brush out
| Product Name | Eastwood UNDERHOOD BLACK® Paint |
|---|---|
| Warranty Term | 90 day |
| Is ESP | No |
| Is Canceled | No |
| 90 Day Returns | Yes |
| ATF Recommended products - Enabled | No |
| FAQ's | Q. How do I apply this under hood paint? A. Surface must be clean, dry, and free of dirt, grease and oil. For maximum protection, first prime with a self-etching primer or epoxy primer before top-coating. For best results, use when can is between 70 and 90 degrees F. This engine-compartment paint may be used over bare metal, self-etching primer, or Rust Encapsulator. |
| Storage Case Included | No |
| Do Not Use - Application - Depreciated | Underhood Black is the correct shade of black, having just the right 10-20 percent semigloss finish most car manufacturers used on radiator supports, inner fender walls, lug wrenches, jack bases, underhood brackets, and other parts. Hardware store black paints are either too thick, too glossy, or the wrong color. Just clean, degrease, and prepare the parts well, then spray on for a factory-like finish. |
| Accessories | Use Pre Painting Prep (10041 Z) to remove residual grease/oil before painting. For maximum protection, use Self Etching Primer (16014 Z) Aerosol or (16009 Z P) Quart on clean metal surfaces. Buy 3 or more and SAVE! |
Related Products
