Eastwood Buffer / Grinder Stand
In stock
SKU
13162
Eastwood Buffer / Grinder Stand is rated
out of
5 by
30.
Work at a more comfortable
height, or save workbench space
height, or save workbench space
Loading...
The right Work Stand, at the right price...designed for your buff motor or grinder
Work at a more comfortable height, or save workbench space, when you mount your buff motor or grinder on this economy work stand.
- 30-1/2" working height
- 11" x 8-3/4" top mounting platform
- Slotted to accept most motors
- Ideal for the weekend resto enthusiast
| Product Name | Eastwood Buffer / Grinder Stand |
|---|---|
| Warranty Term | 1 year |
| Is ESP | No |
| Is Canceled | No |
| 90 Day Returns | Yes |
| ATF Recommended products - Enabled | No |
| Size/Content | Includes Pedestal post, base, top and instructions. Pedestal is 30-1/2" high. Top mounting plate measures 11" x 8-3/4". The three legged base is 18". |
| specifications_ax | Base and platform are cast iron, connected by a steel post. Stand must be bolted to the floor. Some drilling may be required. 3-legged base is 18" in diameter. |
| warranty_ax | 1 Year |
| Storage Case Included | No |
| Do Not Use - Application - Depreciated | This Pedestal can be used to support the 1/3, 3/4, and 1-1/2 horsepower Baldor motors, as well as grinders and small drill presses. Pedestal must be bolted to the floor! Use the (13156) Anchor Kit. |
| Do Not Use - Instructions - Depreciated | 1) Place 3 Pronged Cast Base on floor. 2) Loosen set-screws in base. 3) Insert Pipe into hole in Base and tighten set-screws. 4) Loosen set-screws in the receptacle of the Top Plate. 5) Place Top Plate over Pipe and tighten set-screws. 6) It is done and ready for use! |
| Do Not Use - Safety Info - Depreciated | Pedestal must be securely bolted to the floor. |