Eastwood Fast Etch Rust Remover with pump 32 oz
In stock
SKU
19415ZP
Eastwood Fast Etch Rust Remover with pump 32 oz is rated
out of
5 by
107.
Dissolves rust, leaves a protective zinc-phosphate coating...in 1 step
Loading...
This specially formulated rust remover is a powerful, rust-fighting liquid created to meet the needs of auto restorers. It reaches even inaccessible areas, quickly dissolving iron oxide completely and leaving a zinc phosphate coating. Fast Etch can be sprayed, brushed, or used as a parts dip. It is non-toxic, non-flammable and reusable. This is not a primer. Treated surfaces should be wiped with PRE Painting Prep (10041 Z) or thinner before priming and painting.
Product Name | Eastwood Fast Etch Rust Remover with pump 32 oz |
---|---|
Warranty Term | 90 day |
Is ESP | No |
Is Canceled | No |
90 Day Returns | No |
ATF Recommended products - Enabled | No |
FAQ's | There is a minimal risk of Hydrogen embrittlement when using this rust remover. Bake de-rusted parts at 400 degrees F. for 3 hours if the minimal amount of hydrogen embrittlement is a concern. This rust remover works as a great alternative to abrasive blasting for rust removal. |
warranty_ax | 90 Day |
Storage Case Included | No |
Do Not Use - Application - Depreciated | Eastwood Fast Etch is a Phosphoric acid solution that leaves behind a corrosion resistant coating. Removes rust in seconds to several hrs. depending on temp. and severity of rust. One pt. treats about 20 sq ft. Our rust remover works faster at 90 deg F than at 70 deg F. Fast Etch does not remove paint but may cause discoloring. Remove loose rust & degrease surface with PRE Painting Prep (10041 Z) before using rust remover. After removing rust, wipe down part with PRE Painting Prep (10041 Z) and top coat with Self Etching Primer |
Accessories | PRE Self Etching primer |
Do Not Use - Instructions - Depreciated | 1 |
Do Not Use - Safety Info - Depreciated | always use in a well ventilated area. Consult MSDS for specific safety warnings |