Eastwood Gel Rust Dissolver Gallon
In stock
SKU
12097
Eastwood Gel Rust Dissolver Gallon is rated
out of
5 by
97.
Sticky gel is ideal for roofs, deck lids, hoods, frame rails and more
Loading...
Gel Rust Dissolver sticks to large surfaces to dissolve rust...no need to submerge the metal
- Ideal for roofs, deck lids, hoods, frame rails and more
- Simply wire-brush off loose rust and scale, then apply gel with a brush
- Penetrates deep into the metal, dissolving rust in just a few hours
Eastwood's Gel Rust Dissolver harnesses the powerful rust-dissolving properties of our popular liquid rust dissolver and puts them into a sticky gel, so no submersing is needed!
WARNING: This is an acid-based formula that can damage aluminum and plated surfaces like chrome. Also, this product can be corrosive to metals so only allow it to stay in contact with the substrate long enough to remove unwanted rust.
Product Name | Eastwood Gel Rust Dissolver Gallon |
---|---|
Warranty Term | None |
Is ESP | No |
Is Canceled | No |
90 Day Returns | Yes |
ATF Recommended products - Enabled | No |
Storage Case Included | No |
Do Not Use - Application - Depreciated | Remove loose rust and scale using a wire brush. Apply Gel Rust Diss. using a brush or cloth rag. Apply generously, covering all areas. Using common plastic food wrap, lightly cover the area as to avoid evaporation of the rust dissolver. DO NOT put plastic tightly over surface. Let rust dissolver set for at least 8 hours. Uncover and use a putty knife to scrap off gel. Wash off remaining gel with water. Best results at room temperature If you are going to paint surface, use Eastwood's PRE 10041z to remove any residual dissolver. |
Accessories | 10041Z PRE Painting Prep 43090 Safety Goggles 43098 Nitrile Disposable Gloves |
Do Not Use - Instructions - Depreciated | 1 |
Do Not Use - Safety Info - Depreciated | Always wear eye, skin and respiratory protection. Use in a well-ventilated area. Consult MSDS for specific safety precautions. Make sure cap is tight before storing product. |