Eastwood Rust Converter One Quart
In stock
SKU
51676
Eastwood Rust Converter One Quart is rated
out of
5 by
225.
Stops residual rust; turns it into a ready-to-paint coating...no sanding
Loading...
Rust Converter stops residual rust, and turns it into a black, protective, ready-to-paint coating, without sanding
- Just brush-on (or spray) to transform the rust
- Penetrates faster than other brands
- No mixing needed
- 50-sq.-ft. coverage per quart container
Eastwood's own high-tech anti-rust formula converts rust into a protective polymeric coating that's ready to go as a primer, and is compatible with most top coats.
| Product Name | Eastwood Rust Converter One Quart |
|---|---|
| Warranty Term | 90 day |
| Is ESP | No |
| Is Canceled | No |
| 90 Day Returns | No |
| ATF Recommended products - Enabled | No |
| Size/Content | one US gallon, 128 Fl Oz |
| warranty_ax | 90 Day |
| Storage Case Included | No |
| Do Not Use - Application - Depreciated | Shake well before using. Make sure surface is dry. No dilution or reducing this product is most effective right out of the bottle. Do not apply this to surfaces that are below 50Ý. Do not apply this product to painted surface as damage may occur. Using a brush or spray gun, liberally apply Eastwood's Rust Converter to corroded surface. In about 20 minutes the surface will turn to a dark finish, then apply a second coat and let cure for 48 hours. Temperatures may alter cure times. After 48 hour cure time the surface may be top coated with a paint. For use on steel and iron only. |
| Accessories | 10041 Z PRE Aerosol 51550 EW Concours paint gun 16060Z Rust Encapsulator 50109ZP Ceramic Chassis Black and Epoxy Primer kit |
| Do Not Use - Instructions - Depreciated | Applies easily: simply remove loose rust with a wire brush, then brush- or spray-on Eastwood’s Rust Converter. Allow to dry, then top coat it with a quality coating, such as Eastwood’s Chassis Black. For use on steel and iron only; DO NOT apply to paint. First use a wire brush to scrape rust off surface. Liberally brush-on or spray-on Eastwood Rust Converter, let dry 20-30 minutes. Finally, apply top coat such as Eastwood Rust Encapsulator or Chassis Black. |
| Do Not Use - Safety Info - Depreciated | Always use appropriate eye, skin, and respiratory protection when using this product. Safety information is also described on the can. Consult MSDS (Material Safety Data Sheet) for proper safety requirement. |
Related Products
