Eastwood Textured Rust Encapsulator Black Aerosol 15oz
In stock
SKU
14741Z
Apply a textured finish that stops—and hides—surface rust
Loading...
Stop—and hide—rust in its tracks! Our "Textured" Rust Encapsulator stops surface rust, and hides it too!
- Textured formula hides the rust
- Epoxy-fortified for better adhesion and topcoat compatibility
- Penetrates deeper to prevent rust from spreading or forming, even in hard-to-reach areas
- 15-oz. aerosol covers about 10-15 sq. ft.
- 2%-10% Gloss Level
- As seen on "My Classic Car" TV show
Like our regular Rust Encapsulators, this textured formula seals and stops rust and corrosion from spreading, but it does more—apply it over rusted and surrounding clean metal and it turns it all into a textured surface that hides the rust!
Tested against well-known brands, the family of Eastwood Rust Encapsulators has proven to be superior in sunlight resistance, preventing rust creep, and overall durability. Twice the corrosion resistance of our original formula for greater durability (tested to 500 hours in a salt-spray chamber).
| Product Name | Eastwood Textured Rust Encapsulator Black Aerosol 15oz |
|---|---|
| Warranty Term | 90 day |
| Is ESP | No |
| Is Canceled | No |
| 90 Day Returns | Yes |
| ATF Recommended products - Enabled | No |
| warranty_ax | 90 Day |
| Storage Case Included | No |
| Do Not Use - Application - Depreciated | Use a wire brush to remove loose rust, scale and paint, and remove dust, grease and oil deposits. Feather surrounding paint with 220-grit sandpaper. Shake can for at least 2 minutes once the mixing ball starts to rattle. Hold the Textured Rust Encapsulator can 10"-12" above surface as you spray. A single coat dries to the touch in 20 minutes, and is thoroughly dry in 3-4 hours at 68 degreesF. For greater durability, a second coat can be applied 1 hour after the first. Allow 6-8 hours after the last coat before applying topcoat. Use over or under body fillers. |
| Accessories | SAS Bandit Respirator Eastwood Internal Frame Coating w/Spray Nozzle Eastwood Rust Converter 10041Z PRE Painting Pre |
| Do Not Use - Instructions - Depreciated | 1 |
| Do Not Use - Safety Info - Depreciated | Work in a well-ventilated area when applying this product. The use of a respirator is recommended. Shake vigorously for 2 minutes before spraying. Consult MSDS for specific safety warnings. |
Related Products
