Eastwood Urethane Reducer Fast Below 70 Degrees F - 32oz
In stock
SKU
14158ZP
Eastwood Urethane Reducer Fast Below 70 Degrees F - 32oz is rated
out of
5 by
28.
Use the fast reducer in temps below 70 degrees F
Loading...
A premium quality alcohol and water free urethane reducer, designed to be used with Eastwood's Single Stage urethane paints, Ceramic Engine paints, Ceramic Underhood Black, Ceramic Chassis Black, Candees and even the Low VOC basecoats in areas where VOC limits allow. May also be used to cut viscosity and aid flow in Eastwood 2K urethane primers, epoxy primer and any of Eastwood's urethane clearcoats. Use the fast reducer in temperatures below 70 degrees F.
| Product Name | Eastwood Urethane Reducer Fast Below 70 Degrees F - 32oz |
|---|---|
| Warranty Term | 90 day |
| Is ESP | No |
| Is Canceled | No |
| 90 Day Returns | No |
| ATF Recommended products - Enabled | No |
| warranty_ax | 90 Day |
| Storage Case Included | No |
| Do Not Use - Application - Depreciated | A good rue of thumb is: start by adding no more than 5% reducer , then spray a test pattern. If more is needed, keep going until you've reached the desired spray viscosity. Too much can cause runs, blushing or lead to trapped solvents; solvent pop, wrinkling, blushing again, etc. |
| Accessories | 51550 Concours HVLP Paint Gun, 12776 Evolution HVLP Paint Gun, 20473 2 Stage air dryer System, 12846Z Aeosol Injected Cleaner, 51561z Norton liquid Ice Polishing kit, 12054 Medium Wave IR Lamp, 11979 EW Professional Body Hammers & Dollies |
| Do Not Use - Instructions - Depreciated | 1 |
| Do Not Use - Safety Info - Depreciated | always weare eye, skin and respiratory protection. Always paint in a well ventilated area away from open flame. Consult MSDS for specific safety warnings. |