Eastwood Fender Roller Tool
tire rub on lowered vehicles
Add an Eastwood Service Plan for additional protection?
Learn More
The Eastwood Under Car Fender Roller is an essential DIY tool for custom body and suspension modifications. This tool gently flattens the inner fender lip, increasing the clearance between your fenders and the tires. By doing so, you’ll be able to lower the ride height without causing tire rubs. In the process, it eliminates the sharp edge so it won’t slice through your tires. Rollers also allow auto enthusiasts to run taller, wider tires and wheels by flaring the fenders to make them more accommodating. You can even use them when fixing damage to the wheel arch.
Eastwood Fender Rolling Tool Features:
- Professional grade high quality tool for years of service
- Durable powder coated finish
- Delrin® ball-bearing fender-former wheel
- Fender former eliminates tire rub by increasing tire-to-fender clearance
- Adjustable fender-rolling roller gradually rolls the inner lip flat
- Perfect for lowered vehicles and vehicles with larger wheels
- Adjustable-height arm lets you work on a wide range of automotive and light truck applications
Professional-grade fender roller tool helps you easily increase the clearance between your tire and the fender, roll the fenders, or repair wheel-arch collision damage.
Our exclusive fender rolling tool bolts directly onto the wheel's hub flange. The elongated holes in the adapter plate fit all popular 4- and 5-bolt hubs. It's held in place with the included dished washers and your vehicle's lug nuts. This car fender roller accommodates up to 120.6-mm (4.75") 4- or 5-lug bolt circles. Forming arm adjustability ranges from a minimum of 14" to a maximum of 22.75" measured from the hub center to the edge of the roller.
Our professional-grade fender former is easy to use on any four-bolt or five-bolt hub. The adjustable arm fits almost any car or light truck. Use the Eastwood 1,500-Watt Heat Gun to warm up the paint before you start and reduce the risk of cracking. Those who are new to fender rolling can find more than half a dozen how-to articles and videos in the Eastwood Garage.
| Product Name | Eastwood Fender Roller Tool |
|---|---|
| Warranty Term | 1 year |
| Is ESP | Yes |
| Is Canceled | No |
| 90 Day Returns | No |
| ATF Recommended products - Enabled | No |
| FAQ's | Q: Will the Fender Roller work on all passenger cars? A: For the most part, yes, but won't work with vehicles with larger hubs, such as trucks, VWs and Porsches. Q: Will it work on all fenders? A: Yes, except dual-thickness flanged fenders, mostly found on the rear of full-size cars, such as a 1987 Grand National. Q: What range will it extend? A: From the center of the hub to the roller it will extend from 14" to 22-3/4". |
| Size/Content | The Eastwood # 31158 Fender Roller has slotted holes and will accommodate up to a 120.6 mm (4.75") 4 and 5 lug bolt circles. The adjustability ranges from a minimum of 15-1/4" hub center to edge of roller to a maximum of 21-1/2" hub center to edge of roller. |
| warranty_ax | NOTE - This item is Non-returnable. If defective we will replace the tool. Will not fit Porsche wheel lug bolt pattern. |
| Storage Case Included | No |
| Do Not Use - Application - Depreciated | To use- securely jack up vehicle and remove wheel. Mount Eastwood Fender roller to hub using factory lug nuts. Adjust height and angle so the roller is under the center of the fender's lip. Slowly rotate the unit side to side, occasionally turning in the handle until fender lip is evenly rolled inside. Tech tip- using a heat gun, Apply heat to the out side paint to avoid cracking. |
| Accessories | 50420 Heat gun kit 25271 Truck, VW/Porsche adapter 29724 Low profile floor jack |
| Do Not Use - Instructions - Depreciated | |
| Do Not Use - Safety Info - Depreciated | Make sure vehicle is secure before removing wheels. Use quality jack stands and wheel chocks. Always wear eye, skin and respiratory protection. |
-
Rockwood® 1500W Heat Gun$29.99
