The Eastwood Service PlanProtect your purchase with comprehensive coverage24/7 supportNo deductibles, no additional feesParts & labor costs includedTransferable coverage and more
1 year Warranty Included
90 Day Returns + 100% Satisfaction Guarantee
FREE Lifetime Tech Support
The Eastwood Company Warranty
100% Customer Satisfaction Guarantee
At Eastwood we care about your DIY automotive projects and want you to be 100% satisfied with our products. That’s how we’ve done business since 1978.
Warranty periods vary per product and manufacturer.
The warranty period begins on the date the product is delivered.
Warranty refunds and exchanges require proof of purchase.
To obtain warranty coverage, contact Eastwood at 1-800-343-9353 for an RMA number.
FREE Lifetime Tech Support
We're here to help you Do The Job Right.
This product includes FREE Lifetime Tech Support from our U.S.-Based Customer Solutions Team.
Looking for advice on your project or product recommendations? Our in-house Project Advisors have the same passion for DIY automotive restoration as you do. Get advice on your project, personalized product recommendations and answers to your questions. Give us a call or email projectadvisors@eastwood.com.
It's a Flanger, and a 7/32" Punch, in one handy pneumatic tool
Produce 0.040" offset flanges
Punch 7/32" diameter holes
Requires 4 cfm at 90 psi
Double-action head swivels to let you create flanges and holes from any angle with just a squeeze of the handle.
2-in-1 pneumatic tool saves space in your metalworking toolbox! One side of the double-action head produces 0.040" offset flanges on 20-gauge metal or thinner for clean welding with little grinding. The other side produces perfectly clean 7/32"-diameter holes that are ideal for plug welding; punches holes 1/4" from the panel edge in up to 16-gauge. Unique swivel-head design lets you work from almost any angle.
What's Included
Double-Action Head Swivels To Let You Create Flanges And Holes From Any Angle With Just A Squeeze Of The Handle
Safety Information
Always follow all instructions and warnings and wear proper eye, ear, skin and respiratory protection. When using chemicals always consult MSDS and product data sheets for proper safety precautions.
The Pneumatic Flange and Punch Tool produces a 0.040" offset flange for flush repairs up to 20-gauge, or punches clean 7/32" holes in up to 14-gauge steel. Requires 4 cfm at 90 psi. NOTE: The center of the hole produced is 1/4" from the panel edge.
Rated 5 out of
5 by
Mitch from
As advertisedI have used the flanger/punch one 3 projects since I got it a few weeks ago, I am really please.
Date published: 2023-06-27
Rated 5 out of
5 by
Fordman61 from
Works perfectly for the task I purchased it forBought this to prep panels for replacement on my 1979 Ford F100 I’m building
Date published: 2022-06-18
Rated 5 out of
5 by
Racinrigsby from
Works great.Good for body work. Used to install quarter panels in old car.
Date published: 2021-07-28
Rated 5 out of
5 by
Herrick2014 from
Good toolI've done some floorboards and holes and flange work good
Date published: 2017-10-26
Rated 5 out of
5 by
brow62 from
Asome punchBought this to do some holes worked great and was fast
Date published: 2017-10-15
Rated 5 out of
5 by
Hambone from
Flanger/Punch Tool Pneumatic 7/32"The tool is just what I needed and, did the job as I needed.
Maybe a dumb question, what is a flanger and will it punch holes in a 1960's British car sheet metal?
Asked by: 4Mee
I have used this quite a few times on MG and Sunbeam sheet metal. I have never had complaints other than some of the inner sill repair pieces on an Alpine were a bit too stout to make great flanges but all body metal flanged great
Answered by: Leylandauto
Date published: 2019-10-18
I need to order replacement punch's for the 31015 flanger/punch tool. What is the part number so I can get them ordered?
Asked by: MustangDad
Unfortunately there are no replacement parts available for this item. We apologize for the inconvenience.
Answered by: KHoffnagle
Date published: 2022-10-02
Can I control when to punch a hole? Or does itbpunch a hole every time it closes to make the flange?
Asked by: Richie68
You can control when the unit punches. There is a lever that you depress to activate the unit.
Answered by: S Church
Date published: 2021-11-30
Hello, What gage metal is .040 ? Will this tool flange and punch 16 gage panels? Thank you
Asked by: Bill Stephenson
.040 is between 19 and 20 gauge metal. This tool will flange metal up to 20 gauge and will punch metal up to 14 gauge.
Answered by: NickC
Date published: 2019-10-18
Does this tool require oil lubrication ? If so, how does one accomplish this ?
Asked by: Carguy
This tool does require oil lubrication. A few drops in the air inlet at each use will ensure the tool is lubricated.
Chat 
