High Speed Mandrel For Abrasive Rolls 1/4 Inch x 4 Inch
In stock
SKU
13142
High Speed Mandrel For Abrasive Rolls 1/4 Inch x 4 Inch is rated
out of
5 by
1.
Coarse threads hold abrasive rolls
securely during hi-speed operation
securely during hi-speed operation
Loading...
High speed: 22,000 rpm max.
| Product Name | High Speed Mandrel For Abrasive Rolls 1/4 Inch x 4 Inch |
|---|---|
| Is Canceled | No |
| 90 Day Returns | No |
| ATF Recommended products - Enabled | No |
| Storage Case Included | No |
| Do Not Use - Application - Depreciated | This high speed abrasive roll mandrel is 4" long with a 1/4" shank. The 1/8" diameter pilot is 1" long. For best results use this and all Abrasive Roll Mandrels with light side pressure to avoid bending. For a smoother cut & longer abrasive life use Grinders Grease (13119). We recommend the use of a dust mask like our Disposable Dust Masks (22055) pk of 20, Goggles (43090), and ear protection during all grinding operations. WARNING!!! MAX RPM 22,000 !!! Use Light side pressure ONLY !!! |
| Do Not Use - Instructions - Depreciated | 1 |
| Do Not Use - Safety Info - Depreciated | Always wear appropriate face and hand protection when using this product. This high-speed mandrel is intentionally unhardened, such that it will resist shattering when fatigued. Excessive side-loading or use with unbalanced abrasives may cause mandrel to bend or break. Periodically check mandrel for bending, and if found discard immediately. When using with cartridge roll abrasives, allow the abrasive to do the work (do not apply excessive pressure). For larger diameter (3/4" and greater) rolls, reduce operating RPM to 12,000 maximum. Replace any cartridge roll that delaminates or becomes imbalanced. |