Standard Manifold Smoothing Kit
In stock
SKU
46076K
The easy way to restore that showroom appearance to old or neglected cast iron manifolds, these kits are used with your high-speed die grinder to level rusted pitted surfaces. This Standard Kit consists of twenty 80-grit abrasive cylinders and ten each of 80-grit tapers, 120-grit cylinders and 120-grit tapers. Two mandrels are also included.
After metal is smoothed, apply one of our high temp. coatings. Your rustproof manifold will keep that new look for years. Instructions included.
After metal is smoothed, apply one of our high temp. coatings. Your rustproof manifold will keep that new look for years. Instructions included.
| Product Name | Standard Manifold Smoothing Kit |
|---|---|
| Warranty Term | None |
| Is ESP | No |
| Is Canceled | No |
| 90 Day Returns | No |
| ATF Recommended products - Enabled | No |
| Size/Content | The Standard Exhaust Manifold Smoothing Kit includes the following abrasive rolls: (20) 80 grit cylinders, (10) of each of the following: 80 and 120 grit tapers, and 120 grit cylinders, (2) 4" abrasive roll mandrels and complete instructions. |
| Storage Case Included | No |
| Do Not Use - Application - Depreciated | The Exhaust Manifold Smoothing Kit allows the user to quickly level rough casting marks and grind away corrosion pits as a means to prepare the manifold for coating with one of our Exhaust Manifold Coatings. Typically the Smoothing Kit would be used after abrasive blasting. Included mandrels have a 1/4" shaft. Note: Face, eye and hand protection are recommended when using this kit. |
| Accessories | Replacement abrasive rolls in 80 grit (13091A) cylinder, (13090A) taper and 120 grit (13089A) cylinder, (13088A) taper and abrasive roll mandrels (13122) 4" are available separately. |
| Do Not Use - Instructions - Depreciated | Download Manifold Smoothing Kit instructions PDF Manifold Smoothing Kit - How To Operating Instructions & Safety Guidelines |