FREE Lifetime Tech Support
We're here to help you Do The Job Right.
This product includes FREE Lifetime Tech Support from our U.S.-Based Customer Solutions Team.
Looking for advice on your project or product recommendations? Our in-house Project Advisors have the same passion for DIY automotive restoration as you do. Get advice on your project, personalized product recommendations and answers to your questions. Give us a call or email projectadvisors@eastwood.com.
Rated 5 out of
5 by
wackywheels from
The greatest fill I have ever usedI bought this about 3 weeks ago to repair my doors and other rust starting on my mercury. It has been easy to work with.
Date published: 2018-08-11
Rated 5 out of
5 by
CNC1 from
Works Really Well as Durable Metal SurfaceBought a can about six weeks ago for the impact surface of the back of a trailer where the tail gate comes up against the steel surface. Had needed to weld the seams back together due to modifications and wanted a smooth tough impact resistant surface after weld grinding. Worked great. Pretty thick so mixing is a bit of effort with the hardener. Mix thoroughly like Bondo. Apply quickly as sets up fast.
Side of can was caved in when received. Obviously shipped that way by Eastwood. Indicated to me a lack of caring and made product hard to access in can.
Date published: 2016-05-11
Rated 5 out of
5 by
Jason B from
Great resultsNeeded to repair a rear window channel that was in rough shape. Read some reviews, looked into what others have done to fix this type of issue, and went with the All-Metal product. I was very impressed with the ease of mix and applied easily. Results were fantastic. After sanding and primer, can't tell the problem existed.
Date published: 2015-03-01
Rated 5 out of
5 by
Dennis from
Great ProductBeen using this in restorations for a initial filler after welding and grinding patch panels. Sometimes a quick flip to fill a rust hole (used car special) 5 years later no bubbling or lifting. We never filler over patches without this for an initial base coat. 20 years using it and it's never let us down.
Date published: 2014-03-20
Rated 5 out of
5 by
Anonymous from
Love it!There is a learning curve on mixture, but after that this stuff is really good!
Date published: 2013-05-11
Rated 5 out of
5 by
Anonymous from
Works Great!I have been using this in restorations for years in the body shop. I do not recommend this being your final filler as it is porous to an extent, We have always used it after any metal patch or large repair is accomplished as a base layer for strength and rigidity. Once cured this stuff is rock hard compared to standard polyester fillers, but not brittle... Note though, after wiped and sanded let it sit for a day or so before applying other filler to this to make sure it has time to harden correctly. I would suggest using this on any area you have welded after it has been grinded and before plastic filler work. Outstanding product, been using for 15 years!
Why is all metal body filler so hard to get? Can it ship to utah?
Asked by: Don1
The restorers that use metal filler usually use Lead (Old school)
This product works exceptionally well.
we ship to Utah
Answered by: Anonymous
Date published: 2023-03-28
Can I spray epoxy primer over All metal? Can I apply body filler over fully cured All Metal?
Asked by: Eric
Recommend performing a test area with the all metal and body filler. They epoxy primer will adhere as long as you follow prepping steps.
Answered by: gm75
Date published: 2023-03-17
I'm repairing a rusty curve panel that has rusted holes, sanded and put rust converter acid on it .will this work on it to fill in the arear in stead of bondo
Asked by: gto69
Yes all metal can be used in the same way as a plastic filler (Bondo)
Answered by: vince
Date published: 2021-06-13
Good day, I need to build 1/2 inch up on existing bare metal for installation of Alfa Romeo plastic head light covers. Think this product can handle this?
Asked by: Nicknick
The max this will do is 1/4 inch.
Answered by: SeanW
Date published: 2021-06-08
Hi can this be applied where there is a lead seam? I have replaced a trunk weatherstrip channel and had to remove some of the lead seam section to weld the channel. I could not wipe all the lead off and hoping this product will adhere to the lead.
Asked by: Roland
Yes, this product will adhere to the lead as long as the surface is properly sanded and degreased.
Answered by: Kelly H
Date published: 2020-07-26
Can this filler be layered on top of itself? I prepped an area, and apparently didnt mix the hardner well enough, it was gummy, so I sand most of it off, sanded whole area with 80 grit, and reapplied. Im concerned about it sticking to the areas with AM
Asked by: danman
This can certainly be applied to itself as long as it's been sanded and prepped.
Answered by: Scott C
Date published: 2020-07-23
Can this product be applied over rust converters Like OShpro Phosporic acid
Asked by: donFl
This can be applied over the product as long as the surface is wiped down clean first.
Answered by: SeanW
Date published: 2020-04-15
Could i powder coat over this ? Has to be able to bake at 400 degrees for 20 min. ? I am filling pitted rims before coating
Asked by: Brent
This is not designed to handle the heat of powder coating applications. you would want to use the High temp Lab metal: https://www.eastwood.com/hi-temp-lab-metal-24-oz.html
Chat 
