Body Solder Stick 1/4 lb

Name: Body Solder Stick 1/4 lb
SKU: 31127
Price: 9.99 USD
Availability: InStock

In stock

SKU

31127

Body Solder Stick 1/4 lb is rated 5.0 out of 5 by 13.

$9.99

Single 1/4-lb. stick (30% tin, 70%
lead) for long-lasting body repairs

30/70 Body Solder Stick for easy leading.

Individual 1/4-lb. stick makes it easier to work with. Contains 30% tin, 70% lead, for long-lasting repairs.

More Information
Product Name	Body Solder Stick 1/4 lb
Warranty Term	90 day
Is ESP	No
Is Canceled	No
90 Day Returns	No
ATF Recommended products - Enabled	No
Size/Content	One 1/4 lb bar of 30/70 Tin Lead body solder.
Storage Case Included	No
Do Not Use - Application - Depreciated	Use to fill seams and level shallow dents in steel body work. See (28023) Leadworking Video for more detailed instructions. Be sure to use this product in a well ventilated area. Tin surface to be filled with Tinning Butter (31043). The workable plastic range of 30/70 solder is 362-490 degrees F. Tensile strength at room temperature is 6140 psi, at 200 degrees F 3120 psi, at 300 degrees F 1495 psi. Shear strength at room temperature is 5500 psi.
Do Not Use - Contents - Depreciated	One 1/4-lb. Body Solder Stick
Do Not Use - Instructions - Depreciated	1
Do Not Use - Safety Info - Depreciated	******** NEVER SAND LEAD, FILE ONLY ********** Respiratory Protection- When melted, the temperature should be kept as low as possible.The respirator should have a HEPA (high efficiency particulate air) filter, also known as a N100 filter. Where airborne exposures may exceed OSHA/ ACGIH permissible air concentrations, the min. respiratory protection recommended is a negative pressure air purifying respirator w/cartridges that are NIOSH/MSHA approved against dust, fumes & mists having a TWA not less than 0/05 MG/CU M.