Eastwood Door Hinge Pin Puller
In stock
SKU
31139
Eastwood Door Hinge Pin Puller is rated
out of
5 by
22.
Replace worn hinge pins to help
restore proper door alignment
restore proper door alignment
Loading...
Hinge Pin Remover. Replace worn hinge pins to help restore proper door alignment. This heavy duty hinge pin remover/installer fits a wide range of antique and modern hinges up to 2-7/8" wide.Cast iron frame. Features a strong acme threaded bolt with 3 case hardened 18-8 stainless extension pins measuring (1", 1-1/2", and 2") exerts enough pressure to remove most pins. Designed only for Fords. Limited 1-year manufacturer's warranty. Removes hinge pins up to 7/16" (0.437"). Tool Clearance over 1/2" (0.530").
| Product Name | Eastwood Door Hinge Pin Puller |
|---|---|
| Warranty Term | None |
| Is ESP | No |
| Is Canceled | No |
| 90 Day Returns | No |
| ATF Recommended products - Enabled | No |
| Size/Content | Dropped forged frame. Features a strong acme threaded bolt with 3 case hardened 18-8 stainless extension pins measuring (1", 1 1/2", and 2") and instructions. |
| Storage Case Included | No |
| Do Not Use - Application - Depreciated | Position pin puller on lowest pin first. Remove bolt from puller frame and insert smallest pin into center hole of threaded bolt. Insert bolt and pin into Hinge Pin Puller frame 2 full turns. Use a 3/4" box end wrench or socket to tighten bolt until it bottoms against frame. Unscrew bolt and insert next larger pin until hinge pin is removed. To install push new pin in place and using shortest pin tighten bolt to seat. Repeat as necessary to fully seat hinge pin. |
| Do Not Use - Instructions - Depreciated | 1 |
Related Products
