Eastwood Blast Cabinet Foot Pedal Gun Replacement Nozzles
Make sure you’re prepared for long sandblasting sessions with our spare blast cabinet nozzles that are simple and convenient. These nozzles are designed for the Eastwood Blast Cabinet Foot Pedal and Gun kit. A 6-mm orifice for optimal media and air consumption with a high-volume sandblasting gun. They’re easy to install and have a bright pink color. Follow the instructions below to replace your old nozzles with one from our two-pack.
Stay stocked up on abrasive blasting consumables by shopping at Eastwood. This package contains two replacement nozzles so you’ll have a spare in case one wears out or splits mid-project. We have a variety of other blast cabinet supplies available with a 100% customer satisfaction guarantee. Our solutions and know-how have been helping DIYers Do the Job Right since 1978.
Product Name | Eastwood Blast Cabinet Foot Pedal Gun Replacement Nozzles |
---|---|
Warranty Term | None |
Is ESP | No |
Is Canceled | No |
90 Day Returns | Yes |
ATF Recommended products - Enabled | No |
specifications_ax | Minimum air requirment: 7.1 CFM @ 90 PSI Optimum operation requirments: 10.25 CFM @ 115PSI 6mm Nozzle Dimensions: Length 36mm Diameter 21mm |
Storage Case Included | No |
Do Not Use - Instructions - Depreciated | 1. Remove Knurled Brass Ring from the
end of the Blast Gun Body and remove
Ceramic Nozzle. 2. Inspect interior condition of Ceramic Nozzle for excessive erosion and replace if worn. 3. Insert replacement Ceramic Nozzle with larger conical end inward. 4. Replace Knurled Brass Ring. |
Do Not Use - Safety Info - Depreciated | WARNING: Blasting emits abrasive under pressure. Adequate respiratory eye and body protection must be worn during use. Inhalation of silica based media particles have been known to cause cancer and other deadly diseases, and must be avoided. Wear NIOSH approved respiratory protection while operating this equipment. |